Users of hydraulic equipment need to know how clean their fluid should be. The information and procedure for determining this has not been readily available in the past. This has been largely due to the many factors· that impinge on the decision. This paper introduces a new· system called the Contaminant Life Index (figure 1) which deals with this question head on. The Contaminant Life Index addresses each of the many issues involved in determining required system cleanliness. These factors are presented in a simple, easy to follow format. The CLI delineates only the most salient criteria with the objective to span the numerous diverse types of hydraulic equipment in use.

The post Quantifying The Contaminant Tolerance of Hydraulic Systems Using the Contaminant Life Index appeared first on Tesibis.

With the widespread use of plant-level particle counters, maintenance organizations are becoming more sophisticated and skilled in the management and control of oil cleanliness. This has led to the discovery of a host of new tactics and practices that involve combining the particle counter with other important onsite oil analysis tools and methods.

Contamination can be defined as any unwanted substance or energy that enters or contacts the oil. Contaminants can appear in many forms, and can be highly destructive to the oil, its additives and machine surfaces. It is often overlooked as a source of failure because its impact is usually slow and imperceptible yet, given time, the damage is analogous to eating up the machine from the inside out. While it is not practical to attempt to eradicate contamination from in-service lubricants, control of contaminant levels within acceptable limits can be accomplished and is vitally important.

Contaminants such as particles, moisture, soot, heat, air, glycol, fuel, detergents and process fluids are commonly found in industrial lubricants and hydraulic fluids. However, particle contamination is typically recognized as the most destructive to the oil and machine, which explains why the particle counter is the most widely used instrument in oil analysis today. Additionally, the central strategy to its success in reducing maintenance costs and increasing machine reliability is proactive maintenance.

The post Why Onsite Particle Counting Makes Sense appeared first on Tesibis.

Some of you are personally acquainted with my father, Dr. Ernest C. Fitch. Others may know of him by reputation or perhaps through his publications.

His knowledge and vision have been an inspiration to me throughout my career. He is a great mentor and motivator. He is known for the mark he made in the fields of tribology and fluid power. However, in my mind, it was his seminal work in contamination control that most encouraged me to publish this interview. From my observations, the applied knowledge of contamination control in the previous 25 years by hundreds of companies and government agencies has had a far-reaching and lasting impact on machine reliability, more so than any other maintenance initiative during the same period.

The post A Conversation with Dad – Pioneer, Educator and Mentor in Fluid Contamination Control appeared first on Tesibis.