Articles & Resources
-

Performing a Failure Scene Investigation
As head of Noria’s failure investigation group, I’ve led many interesting studies in search of failure root causes and remedies. These include missile system failures, highway accidents, helicopter crashes, and turbine-generator wrecks. Most of these nearly 100 investigations were substantially hampered by errors made in collecting and preserving evidence. Read More
-

Philosophies of Transformational Change and ICML 55
I first met Ron Moore in the early 1990s. He is known as an icon in the reliability community and is the author of an excellent book entitled What Tool? When? This book tackles a delicate subject that is both difficult and controversial. Read More
-
Proactive Maintenance – The New Technology for Cost-Efficient Contamination Controlof Mechanical Machinery
It has been proven that almost all mechanical failures are caused by contamination; hard particle contamination to be ·specific. Once the root cause of machine failure has been defined, a program to correct these failures, extend machine life, and reduce maintenance costs must be developed. Such a program has been developed; it is called Proactive… Read More
-
Quantifying The Contaminant Tolerance of Hydraulic Systems Using the Contaminant Life Index
Users of hydraulic equipment need to know how clean their fluid should be. The information and procedure for determining this has not been readily available in the past. Read More
-

Recognizing the Symptoms of Lubricant Incompatibility
Rule No. 1: Don’t mix incompatible lubricants. Rule No. 2: When in doubt, assume that two lubricants, when mixed, will be incompatible and will exhibit adverse side effects. Read More
-

Remedies for a Bad Maintenance Culture
You may not be surprised to know that most companies need a culture intervention – something like a 12-step program. This column will discuss behavioral issues that are often at the core of a culture of neglect and mediocracy. It borrows much from management science and leadership principles. Read More
-

Review of Degradation Mechanisms Leading to Sludge and Varnish in Modern Turbine Oil Formulations
In recent years, there has been an unusually large number of reported cases associated with varnish and sludge formation in turbine-generator and compressor applications using Group II turbine oil formulations. Read More
-

Sludge and Varnish in Turbine Systems
The products of lubricant degradation are called sludge and varnish. These products start in the dissolved form and accumulate until the lubricant reaches its capacity, referred to as the saturating point, forcing any excess to convert into insoluble degradation products. Read More
-
Sludge and Varnish: Two Puzzling Contaminants
Most oil-related problems in machinery lead to wear or corrosion. However, there is one very serious problem – the presence of sludge and varnish – that may cause neither. Instead, these substances plug flow passages and cause valve sticking. Read More
-

Strategic Implementation and Cost/Benefit of Contamination Control
Contamination control encompasses the subject of machine life and maintenance costs. This paper discusses the Life Extension Method (LEM), a program to extend the meantime between failures based on improved fluid cleanliness levels. Read More
-

Strategies to Achieve and Sustain Dry Oil
Countless times, I’ve devoted this column to stressing the virtues of contamination control. With each passing year, we seem to receive more and more user feedback detailing and validating the business case for clean, dry and cool oil. Read More
-

Successful Oil Analysis Practices in the Industrial Plant
Every industrial organization has experienced the consequences of shoddy maintenance: contract penalties, junked parts, injuries, catastrophic damage, ballooning costs, missed shipping dates, irate customers, and sickly quarterly financial reports. Gone are the days when a machine had a predictable service life, after which it was replaced, continuing the cycle. Today, machinery and equipment can be… Read More
-

Tactics For Identifying Wear Metal and Solid-particle Suspensions
The most widely used laboratory methods for initial detection of abnormal levels of wear debris in used oils include elemental analysis, ferrous density analysis (DR, etc.), particle counting and patch testing. Read More
-

Taking the Guesswork Out of Filter Selection
y now, organizations that have advanced reliability and maintenance programs understand the intrinsic value of lubricant cleanliness. Noria and many others have published extensively on this subject. Read More
-

The Accuracy and Reliability of Optical Particle Counters with Industrial Oils and Hydraulic Fluids
Optical particle counters (OPC’s) have a long history of use in industrial hydraulic applications. Traditionally, their success has been limited to scientific laboratories and other highly controlled environments. Read More
-

The Anatomy of a Filter Inspection Report
When the history of the condition monitoring field is written, there will likely be a chapter, or at least a few pages, on the odd paradox surrounding how infrequently use of used filter testing was employed (in the beginning). Read More
-

The Basics of Used Oil Sampling
Proper oil sampling is critical to an effective oil analysis program. Without a representative lube sample, oil analysis cannot be used effectively to monitor oil condition, predict machine failures or help you extend asset life. Read More
-

The Benefits of Using Wear Debris Analysis in Industrial Machinery
The analysis of powertrain lubricants for the purpose of detecting faults and abnormal wear patterns is a useful practice in mobile equipment applications. Unfortunately for many users, these techniques don’t always transfer successfully into stationary equipment applications. In recent years, new approaches and techniques have been advanced to improve the detection of incipient and developing… Read More
-

The Difference Between Good Lubrication and Good Lubricants
I have learned that excellence in lubrication is just as difficult to realize as it is rare to find. The reasons for this are many. One simple explanation is the field of lubrication is a specialty that takes education and years of experience to master – like most professions. Read More
-

The Hazards of Water Contamination in Oil
Most of us are well aware of the enormous damage water can exact on a machine and its lubricants. However, the magnitude of this potential destruction seems to depend directly on five enabling factors. These factors are listed below and are further diagramed in Figure 1. Read More