Articles & Resources
-

Review of Degradation Mechanisms Leading to Sludge and Varnish in Modem Turbine Oil Formulations
A wide range of fluid degradation and contamination-related issues can affect turbine lube oil systems. One serious and growing concern is the presence of sludge and varnish. Read More
-

Root Cause Analysis for Lubrication Failures
Knowing when a piece of equipment is going to fail (predictive maintenance) is much more difficult than making it last long (proactive maintenance). Even more complex is root cause analysis (RCA) which is performed postmortem, like an autopsy. Read More
-

Sampling Methods for Used Oil Analysis
Sampling is arguably the most important step in the oil analysis process. If the sample in the bottle fails to effectively represent the lubricant and the condition of the machine from which it was drawn, no meaningful conclusions can be from the oil analysis data. Read More
-

Select the Right Metrics for Improved Maintenance and Reliability
Experts agree that the best way to overcome a catastrophic machine failure is not to have one. However, those in the maintenance field understand that machine reliability comes at a price. Monitoring key performance indicators of machine reliability alone may fail to control wasteful and ineffective expenditures that were half-heartedly intended to reduce failure and… Read More
-

Selecting the Best Strategies for a Successful Oil Flush
This is Part Three of a four-part series on flushing. Part One (May-June issue of Machinery Lubrication) addressed the topic of when to perform a flush and the possible consequences of delaying the procedure. Read More
-

Should New Lubricant Deliveries be Tested?
They are labeled and stored by humans. When it comes to humans, there is one inalterable constant – we make mistakes. Sometimes this is due to lack of vigilance. Sometimes it’s lack of knowledge. It might even be because of indifference. Read More
-

Sight Glass Oil Analysis
Several years ago, when my son was a Cub Scout, his den went on a night hike at our local wildlife sanctuary. He and I went together on this outing. We were led by a professional nature guide who worked full-time at the sanctuary. I wasn’t expecting much; after all, what can one see in… Read More
-

Silent Assumptions of Bearing Reliability
There are several important silent assumptions of bearing reliability. However, before I address these assumptions, some even more basic assumptions and statements of fact must be established. Read More
-

Strategies to Extend Drain Intervals and Reduce Lubricant Consumption
The reasons that lubricants age and need to be replaced periodically are well known. It is true that many of the factors that influence lubricant consumption and oil change intervals are not within the realm of control of most users. However, there are far more controllable factors that many user organizations fail to capitalize on… Read More
-

Ten Things You Probably Didn’t Know About Air Contamination
Anybody who has been in the lubrication field for at least a couple of years has likely been badgered by problems relating to air contamination. Indeed, aeration and foam present many serious reliability concerns which merit immediate attention by machinery maintainers. Read More
-

The Business Case for Lubrication Excellence
Machines fail for a reason. They’re not supposed to wear out. Humans are at the root of the vast majority of these failures. It’s also humans that can intervene and restore plants to healthy and sustained operation. This is not an imaginary concept but rather a living reality in a growing number of companies today. Read More
-

The Daily One-minute Inspection
How does this relate to lubrication and maintenance? In my view, the most important maintenance function doesn’t require anything from the tool box. It doesn’t require an instrument or an oil sample. It may not be on your PM schedule or lube route. Read More
-

The Effects of Temperature on Lubricants (Why oil is like an egg)
Hot oil has typically received the most press, even in this publication. After all, oil is not like fine wines that get better over time. In fact, even the very best wine will stress-out when exposed to too much heat. Read More
-

The Enduring Grease vs. Oil Debate
Many who claim to be purists tout that they prefer oil over grease. But then again, there are those die-hard grease advocates who have their own orthodoxy. Read More
-
The Five Cardinal Signs of a Healthy Machine
You cannot monitor your way to a healthy machine just like frequent tests for cholesterol and blood pressure do not make their readings lower. Or do they? Monitoring physical conditions brings vision and awareness to health. It is continuous feedback about how we’re doing. In a similar manner, from measured readings we can report and… Read More
-

The Four States of Water in Oil
In the last 30 years or so, most of the literature, including Noria’s publications, refer to water as having three states. Free water has been redefined as being water that, by force of gravity, will phase out of the oil. This means it will separate below (most common) or above the oil phase depending on… Read More
-
The Hidden Cost of an Untrained Workforce
Modern organizations call it raising the corporate IQ. Most of us have seen statistics on the lifetime financial returns of a college education. When it comes to education, a penny saved is not a penny earned, but rather green dollars forfeited – hundreds of them, all for the quest of a penny. Read More
-

The Hidden Dangers of Lubricant Starvation
For those who strive for lubrication-enabled reliability (LER), more than 95 percent of the opportunity comes from paying close attention to the “Big Four.” Read More
-

The History of Lubrication
In the beginning, man invented machines. One of the first machines, and perhaps the most celebrated invention of all time, was the cart or wagon incorporating the wheel. Read More
-

The Most Important Lubrication Inspection: Abnormal Changes in Oil Level
A sudden change in oil level, either up or down, is a telegraphed alert that something is wrong. And, this “something” could potentially be serious. Deferring maintenance or ignoring this alert could lead to a costly repair and longer downtime in the future. The frequent examination of quality oil level sight glasses by trained inspectors… Read More